Cat 5 LAN cable Cat 5 LAN accessories computer peripheral telephone cable modular p.c.b mount jack taiwan

New computer will include one or two USB phone-jack-size connectors on its rear panel. Peripheral like a keyboard, mouse, or monitor will be plugged into a USB jack, And installation and configuration will be completed automatically. Adding a considerably faster than the 115 Kbps of a conventional serial port. USB provides two data speeds a low-speed 1.5 Mbps for peripherals such as keyboards, mice, and joysticks, and a maximum-speed 12 Mbps rate for monitors, printers, scanners, and digital telephones. The USB stand-alone hub enables the plug-and-play connection for multiple devices, while deriving its power from your PC. Simply connect the hub to the computer's USB port, then plug-in up to 4 low or full speed USB devices with one of the A/B cables. Each hub can be daisy-chained to accommodate the need for additional ports.

Features

Expand USB-ready PC system to have additional 3 USB Port

4 USB Port up to 500mA per port

Self-power mode and bus-power mode auto detection

Over current protection on each port

Power LED to indicate

Full-speed and low-speed data speed

Interconnect over 127 various devices

Enable the plug-and-play connection

Windows 98 device drives automatic installation

USB and ACPI compliant

USB features

Highly optimised for high speed communication applications such as voice/data transfer

8-bit USB Microcontrollers available in september 97(C540/c541)

Fully compliant with USB standard specification

Supports all 4 USB transfer modes

Supports both low and high speed data rates(1.5/12 Mbps)

Fast dedicatied extra USB memory on-board

PCI USB Host Card

Features

USB and ACPI compliant
Chains up to 127 USB devices
LED to indicate active USB port
Over current portection on each port
Add 2 USB root-HUB ports to desktop PC
Each port with maximum 500mA power current
Windows 98 device drivers automatic installation
Truly Plug & Play automatic system configuration
Support both Full-speed and Low-speed transfer rate

Specifications:
Interface Standard: PCI v2.1, Bus master mode and USB v1.0
USB Connector: Two A style socket
Data Transfer Rate Full-speed at 12Mb/sec and low-speed at 1.5Mb/sec
LED: 2 LEDs, One LED per port


	Simply connect this cable USB A-style to your computer's USB Port. then plug the other end of Centronic into printer.	USB adaptor lead with 40 cm USB A-style cable, while deriving its power from your PC enables the plug-and-play connection for multiple devices.	The USB conversion adaptor lead offer USB audio DAC system with 40 cm USB A-style cable, you can connect L/R speaker and Mic.